Reduce Salt Water Flushing Time By 75%

What are the two main reasons people stop flushing the salt water from their engines? Time and hassle.

Imagine if you could drain all that corrosive salt water from your engine before you start flushing.

With a simple turn of the Minute Drain valve you can empty all salt water from your engine in about one minute, allowing you to start your flushing process with 100% fresh water.

Starting with no salt water and 100% fresh water allows you to get a more complete flush in less time while using less fresh water.

Less time, less fresh water, less hassle.

Salt Water Flushing Directions

• Remove boat from water by lift or trailer.
• Open Minute Drain valves in engine area and drain.
• Hook up fresh water source, flush, then close valves.
• Turn on bilge pump and pump out excess water.